UEFI boot: no Qubes OS option

msm · October 6, 2023, 9:54am

Fall back to UEFI shell if Qubes boot entry is missing

opened 09:26AM - 02 Jun 22 UTC

T: enhancement P: default pr submitted C: boot

[How to file a helpful issue](https://www.qubes-os.org/doc/issue-tracking/) #…## Qubes OS release Latest as of posting, 4.1.0 ### Brief summary I manually unplugged every drive on my computer except for the target drive for the installation, which was all free space unpartitioned. Installer ran typically, chose automatic for the installation type. Booted into the OS' configuration and then the full OS. GRUB is verified to have worked because I managed to see it when initially booting for configuration and because of a later restart due to a display artificating and then system lockup problem I had that I attribute to Nvidia. After using another drive and then unplugging it, and plugging the Qubes drive back, there was no detectable boot source. I booted a live OS and found that the partition structure was intact but didn't investigate further and reinstalled Qubes. I then got the idea to see if this issue happened if I BIOS disabled drives instead of unplugging them. I disabled my Qubes drive and enabled another, and booted into it fine. I then disabled my other drive and reenabled the Qubes drive and the same issue happened again where my system does not see any boot entries. The system does see the drive, and switching on CSM and legacy boot I can boot from the drive but get an error screen saying to boot from proper media. This second time, I _kind of_ fixed it but I must do these steps every time I remove the drive or disable it in BIOS. I lose the option to boot without the Xen hypervisor and the boot hiccups. I essentially have to boot my install media, run Anaconda rescue and: 1. Mount the bootloader partition 2. Copy the contents of /mnt/EFI/qubes/ to /mnt/EFI/BOOT/ 3. Rename grubx64.efi to bootx64.efi 4. Rename grub.cfg to bootx64.cfg 5. efibootmgr -v -c -u -L Qubes2 -l /EFI/BOOT/bootx64.efi -d /dev/sda -p 1 ### Steps to reproduce I believe the best way to reproduce this issue is to do a fresh install of Qubes on hardware similar to mine: Asus Prime Z-390-A Motherboard Intel i7-9700K CPU 16GB DDR4 RAM 1TB HDD Most notably, this motherboard. I will be filing a compatibility report soon, but I believe this motherboard may have something to do with how it reads the GRUB bootloader as it's configured for Qubes. Further, these are the only non-stock BIOS settings: - Disabling the Intel LAN Controller (it causes a PCI reset error and ends the last step of the configuration, doesn't matter since I don't use it, and I believe the fact that it's unplugged is the reason this issue happens) - Enabling Virtualization - Enabling Vt-d - Disabling all other drives ### Expected behavior The GRUB bootloader is supposed to appear after the BIOS initializes regardless of whether the drive was previously unplugged from the system or not (safely of course). ### Actual behavior Please read above. After unplugging the drive or disabling it in BIOS, the entry for GRUB is missing.

This issue explains more about UEFI boot entries missing. There are also instructions there for fixing UEFI

Mount the bootloader partition

Copy the contents of /mnt/EFI/qubes/ to /mnt/EFI/BOOT/

Rename grubx64.efi to bootx64.efi

Rename grub.cfg to bootx64.cfg

efibootmgr -v -c -u -L Qubes2 -l /EFI/BOOT/bootx64.efi -d /dev/sda -p 1