I saw someone has installed successfully to an intell NUC. I download the latest image on Sunday 31/1/2021
I checked the SHA-256 matched and that it was correctly signed based on the signature download from three certificate servers.
I tried and it failed even to boot let alone install.
I took a photo as the diagnostics wizzed by unfortunately I missed the far right of the screen.
Below is a copy from that photo of the diagnostics and the far right is marked… where it is missing.
These long lines can be identified because they continue on the next line in the log.
Can someone tell me what is wrong. I presume I need to change some EUFI BIOS settings to get this install to work. I am currently trying to use the dynamic power settings to be as efficient as possible.
Or are these signs of a more sinister problem.
Are there any instructions somewhere for installing on an Intel NUC?
ACPI: Invalid sleep control/status register data: 0:0x8: 0x3 0:0x8:0x3
ACPI: 32/64X FACS address mismatch in FADT 6f1b0000/0000000000000000, using 32
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
Enabling APIC mode: Phys. Using 1 I/O APICs
Switched to APIC driver x2apic_cluster.
xstate: size: 0x440 and states: 0x1f
Unrecognised CPU model 0xa6 - assuming not reprpoline safe
Unrecognised CPU model 0xa6 - assuming vulnerable to lazyFPU
Speculative mitigation facilities:
Hardware features: IBRS/IBPB STIBP L1D)FLUSH SSBD MD_CLEAR IBRS_ALL RDCL_NO SKIP_L1DFL…
Compiled-in support: INDIRECT_THUNK
Xen settings: BTI-Thunk JMP, SPEC_CTRL: IBRS+ SSBD-, Other: IBPB
Support for VMs: PV: MSR_SPEC_CTRL RSB EAGER_FPU MD_CLEAR, HVM: MSR_SPEC_CTRL RSB EAGE…
LEAR
XPTI (64-bit PV only): Dom0 disabled, domU disabled
PV L1TF shadowing: Dom0 disabled, DomU disabled
Using scheduler: SMP Credit Scheduler (credit)
Platform timer is 23.999MHz HPET
Detected 1608.088 MHz processor.
Unknown cachability for MFNS 0xa0-0xff, assuming UC
Unknown cachability for MFNS 0x78800-0x7cfff, assuming UC
Initing memory sharing.> CPU0: No irq handler for vector 6c (IRQ -2147483648, LAPIC)
Intel VT-d iommu 0 supported page sizes: 4kb, 3MB, 1GB.
Intel VT-d iommu 1 supported page sizes: 4kb, 3MB, 1GB.
Intel VT-d snoop Control not enabled.
Intel VT-d Dom0 DAM passthrough not enabled.
Intel VT-d Queued Invalidation enabled.
Intel VT-d interupt mapping enabled.
Intel VT-d Posted interupt not enabled.
Intel VT-d Shared EPT tables enabled.
I/O Virtualisation enabled
- Dom0 mode: relaxed
Interupt remapping enabled
ENABLING IO-APIC IRQs
→ Using old ACK method
…MP-BIOS bug: 8254 timer not connected to IO-APIC
CPU0: No irq handler for vector e7 (IRQ -8)
IRQ7 a=0001[0001,0000] v=60[ffffffff] t=IO-APIC-edge s=00000002
failed :(.
Panic on CPU 0:
IO-APIC + timer doesn’t work! Boot with apic_verbosity=debug and send a report.
with the ‘noapic’ option
Reboot in five seconds…