Sys-audio Has Failed to Start

[connor.blane]

Everytime i start sys-audio, it gave me that pop-up: Qube sys-audio has failed to start: Internal Error: Active 0000:05:00.0 devices on bus with 0000:05:00.1, not doing bus reset

Audio qube

An audio qube acts as a secure handler for potentially malicious audio devices, preventing them from coming into contact with dom0 (which could otherwise be fatal to the security of the whole system). It thereby mitigates some of the security risks of using USB devices and Bluetooth devices. Nonetheless, we strongly recommend carefully reading the security warning on USB input devices devices before proceeding. With an audio qube, many kinds of devices can be used (that previously were eit…

This is the guide i followed. I stoped at “Testing sound” Step.
Devices attached to sys-audio:
05:00.1 Audio Device: NVIDIA Corporation GP106 High Definition Audio Controller
07:00.4 Audio Device: Advanced Micro Devices, Inc. [AMD] Starship/Matisse HD Audio Controller
Templated used for audiotemplate: kicksecure-17

[psblut]

@connor.blane

Active 0000:05:00.0 devices on bus with 0000:05:00.1, not doing bus reset

Did you check that they are in different iommu groups? (You need to boot to a separate non-Xen OS for that.)

[pablob]

If your devices are in different IOMMU groups, but you still get this message, enable the “no-strict-reset” option for PCI passthrough (you can do that from the Qube Manager settings, or through the command line in dom0).