hallo all
at the first sorry for my englich so i download the qubes os iso and burn it in usb 8Giga
boot from bios as we do complet installation untilit done well
when reboot the system to finish cofiguration and selecting ā¦when done it stop and nothing work no mouse no keybord ā¦ i hold the power to reboot ā¦and hit quit
so the system is on and no network or choice at the top to select wifi and when i plugin the cable ethernet no connection too nothing change
i have dell E5520 laptop i5 with 4 giga
brodcom 802;11 NETWORK ADAPTER
NET EXTREM 57XX GIGABYTE
i search and do all sollution in youtub
If you choose to write in English, please do not apologize for doing so poorly, as it is unnecessary. We understand and will ask for clarification if needed.
So WiFi doesnāt work and ethernet is also not working, correct? It is likely some incompatibility issue with the network card of your device.
On this other discussion a user also has a broadcom, maybe it can help:
If that doesnāt work and nobody else is able to provide much more help, perhaps the solution is to get an alternative network card.
Tank you very much sir so
it stay no wifi no ethernet
i try with sim card dangle also no internet
iwill change the laptop or apgrade RAM to 8 GIGA
i will tell if sloved thanks
oh at the end of installation it stop at setup network no keybord no mous work
i thnk the problem the ram or change the card network
This forum contains an in-your-language section with Spanish, Deutsch and Chinese.
So in the in-your-language section, you can try to get help with theses languages or try with your native language.
But we understand your English, so you can also continue with this language!
Network
With exotic network devices, an external USB NIC (Network Interface Controller) could help. Itās a step to get network access, then Itās simpler to update with the drivers and firmware required for your internal NICs (ethernet and wifi).
Same here. Qubes doesnāt show a wi-fi device in my network manager. I have a Broadcom adapter and it shows up in the Device tab as 03:00.0 Network controller: Broadcomā¦ Wireless Network Adapter.
Fortunately Ethernet works.
I know with other Linux installations like Ubuntu, I would have to download the driver to get it to work. Would this be the same issue in Qubes?
Itās a Broadcom 4360. I think the relevant Debian driver installation instruction is here: wl - Debian Wiki
The install failed at step 2. The last few lines show:
Building initial module for 5.4.136-1.fc25.qubes.x86_64
Error! Bad return status for module build on kernel: 5.4.136-1.fc25.qubes.x86_64 (x86_64)
Consult /var/lib/dkms/broadcom-sta/6.30.223.271/build/make.log for more information.
dpkg: error processing package broadcom-sta-dkms (āconfigure):
installed broadcom-sta-dkms package post-installation script subprocess returned error exit status 10
Errors were encountered while processing:
broadcom-sta-dkms
E: Sub-process /usr/bin/dpkg returned an error code (1)
Itās a Broadcom 4360. I think the relevant Debian driver installation instruction is here: wl - Debian Wiki
The install failed at step 2. The last few lines show:
Building initial module for 5.4.136-1.fc25.qubes.x86_64
Error! Bad return status for module build on kernel: 5.4.136-1.fc25.qubes.x86_64 (x86_64)
Consult /var/lib/dkms/broadcom-sta/6.30.223.271/build/make.log for more information.
dpkg: error processing package broadcom-sta-dkms (āconfigure):
installed broadcom-sta-dkms package post-installation script subprocess returned error exit status 10
Errors were encountered while processing:
broadcom-sta-dkms
E: Sub-process /usr/bin/dpkg returned an error code (1)
And what does the relevant section of
/var/lib/dkms/broadcom-sta/6.30.223.271/build/make.log tell you?
I guess I was wrong thinking it worked. It installed without problems but there wasnāt a wireless network available. I connected the qube to sys-whonix and got connection but an available update notification appeared and the update reinstalled the broadcom driver with a newer version but the install failed like before. Also I was not able to start the qube again if both HVM and kernel off are selected.
Hereās the log. It seemed like you resolved the problem with your previous solution so I didnāt bother posting the log.
DKMS make.log for broadcom-sta-6.30.223.271 for kernel 5.4.143-1.fc25.qubes.x86_64 (x86_64)
Thu 09 Sep 2021 10:41:39 AM CDT
/bin/sh: 1: [: Illegal number:
/bin/sh: 1: [: Illegal number:
Wireless Extension is the only possible API for this kernel version
Using Wireless Extension API
KBUILD_NOPEDANTIC=1 make -C /lib/modules/5.4.143-1.fc25.qubes.x86_64/build M=pwd
make[1]: warning: jobserver unavailable: using -j1. Add ā+ā to parent make rule.
make[1]: Entering directory ā/usr/lib/modules/5.4.143-1.fc25.qubes.x86_64/buildā
CFG80211 API is prefered for this kernel version
Using CFG80211 API
Kernel architecture is X86_64
AR /var/lib/dkms/broadcom-sta/6.30.223.271/build/built-in.a
CC [M] /var/lib/dkms/broadcom-sta/6.30.223.271/build/src/shared/linux_osl.o
CC [M] /var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_linux.o
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_linux.c: In function āwl_pci_probeā:
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_linux.c:780:2: warning: this āifā clause does not guardā¦ [-Wmisleading-indentation]
if ((val & 0x0000ff00) != 0)
^~
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_linux.c:782:3: note: ā¦this statement, but the latter is misleadingly indented as if it were guarded by the āifā
bar1_size = pci_resource_len(pdev, 2);
^~~~~~~~~
CC [M] /var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_iw.o
CC [M] /var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.o
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c: In function āwl_dev_ioctlā:
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:460:9: error: implicit declaration of function āget_dsā; did you mean āget_fsā? [-Werror=implicit-function-declaration]
set_fs(get_ds());
^~~~~~
get_fs
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:460:9: error: incompatible type for argument 1 of āset_fsā
set_fs(get_ds());
^~~~~~~~
In file included from ./include/linux/uaccess.h:11,
from ./arch/x86/include/asm/fpu/xstate.h:5,
from ./arch/x86/include/asm/pgtable.h:26,
from ./include/linux/mm.h:99,
from /var/lib/dkms/broadcom-sta/6.30.223.271/build/src/include/linuxver.h:65,
from /var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:26:
./arch/x86/include/asm/uaccess.h:29:40: note: expected āmm_segment_tā {aka āstruct ā} but argument is of type āintā
static inline void set_fs(mm_segment_t fs)
~~~^~
In file included from /var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:43:
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c: In function āwl_set_auth_typeā:
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.h:52:5: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (wl_dbg_level & WL_DBG_DBG) {
^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:813:3: note: in expansion of macro āWL_DBGā
WL_DBG((ānetwork eap\nā));
^~
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:814:2: note: here
default:
^
cc1: some warnings being treated as errors
make[2]: *** [scripts/Makefile.build:262: /var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.o] Error 1
make[1]: *** [Makefile:1734: /var/lib/dkms/broadcom-sta/6.30.223.271/build] Error 2
make[1]: Leaving directory ā/usr/lib/modules/5.4.143-1.fc25.qubes.x86_64/buildā
make: *** [Makefile:177: all] Error 2
Cheers.
Two things - I thought you were using a native kernel, but thereās a
reference to lib/modules/5.4.143-1.fc25.qubes.x86_64. Why ?
Then thereās the errors and āwarnings being treated as errorsā message - you can
try to work around this, but itās better to see if you can get it fixed
at source, i.e. Broadcom
I found a few other similar reports online, not Qubes related.
Your suggestion to setup the standaloneVM as HVM resolved the installation problem. That log was from a prior attempt. Thatās why I didnāt upload the log after it installed correctly.
But more problems occurred after the good install. I didnāt see the wireless connection option available in the network manager. Also I received a notification of an update available on the standaloneVM. When it updated, it ran into the kernel installation errors again. Also, now I can no longer start the standaloneVM while in HVM+no kernel. I deleted the standaloneVM and started over, but I still canāt get the new VMs to start either. Thereās a log thatās a zillion lines that I couldnāt understand.
I figure out the HVM+no kernel = no start problem. The VM was based on a custom debian-10 and it was missing packages(s) to get it to start. But, Iām still at the point where the broadcom driver installed correctly but thereās still no wi-fi connection.