---
layout:
'hcl'
type:
'Desktop'
hvm:
'yes'
iommu:
'yes'
slat:
'yes'
tpm:
'2.0'
remap:
'yes'
brand: |
ASUS
model: |
System Product Name
bios: |
3611
cpu: |
AMD Ryzen 3 PRO 4350G with Radeon Graphics
cpu-short: |
FIXME
chipset: |
Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne Root Complex [1022:1630]
chipset-short: |
FIXME
gpu: |
Advanced Micro Devices, Inc. [AMD/ATI] Renoir [Radeon Vega Series / Radeon Vega Mobile Series] [1002:1636] (rev da) (prog-if 00 [VGA controller])
gpu-short: |
FIXME
network: |
Realtek Semiconductor Co., Ltd. RTL8125 2.5GbE Controller [10ec:8125] (rev 05)
memory: |
15666
scsi: |
usb: |
4
certified:
'no'
versions:
- works:
'FIXME:yes|no|partial'
qubes: |
R4.3.0
xen: |
4.19.3
kernel: |
6.12.59-1
remark: |
FIXME
credit: |
FIXAUTHOR
link: |
FIXLINK
Not sure if it is a duplicate of previous ASUS B550. But there are many ASUS B550 variants.
Remarks
- On 4.3 clean installation (Test media and install), the anaconda outputs
[Firmware Bug]: CPU 1: APIC ID mismatch. Firmware: 0x0002 APIC: 0x0001
[Firmware Bug]: CPU 2: APIC ID mismatch. Firmware: 0x0004 APIC: 0x0002
[Firmware Bug]: CPU 3: APIC ID mismatch. Firmware: 0x0006 APIC: 0x0003
[Firmware Bug]: CPU 4: APIC ID mismatch. Firmware: 0x0001 APIC: 0x0004
[Firmware Bug]: CPU 5: APIC ID mismatch. Firmware: 0x0003 APIC: 0x0005
[Firmware Bug]: CPU 6: APIC ID mismatch. Firmware: 0x0005 APIC: 0x0006
amd_pstate: failed to enable driver mode(3)
ccp 0000:07:00.2: tee: ring init command failed (0x00000005)
ccp 0000:07:00.2: tee: failed to init ring buffer
[ OK ] Finished modprobe@configfs.service - Load Kernel Module configs.
Mounting sys-kernel-config.mount - Kernel Configuration File System...
[ OK ] Mounted sys-kernel-config.mount - Kernel Configuration File System.
[ OK ] Started plymouth-start.service - Show Plymouth Boot Screen.
[ OK ] Started systemd-ask-password-plymouth.path - Forward Password Requests to Plymouth Directory Watch.
[ OK ] Reached target cryptsetup.target - Local Encrypted Volumes.
[ OK ] Reached target paths.target - Path Units.
[ OK ] Reached target sysinit.target - System Initialization.
[ OK ] Reached target basic.target - Basic System.
[ OK ] Stopped systemd-vconsole-setup.service - Virtual Console Setup.
Stopping systemd-vconsole-setup.service - Virtual Console Setup...
Starting systemd-vconsole-setup.service - Virtual Console Setup...
[ OK ] Finished systemd-vconsole-setup.service - Virtual Console Setup.
[Firmware Bug]: CPU 1: APIC ID mismatch. Firmware: 0x0002 APIC: 0x0001
[Firmware Bug]: CPU 2: APIC ID mismatch. Firmware: 0x0004 APIC: 0x0002
[Firmware Bug]: CPU 3: APIC ID mismatch. Firmware: 0x0006 APIC: 0x0003
[Firmware Bug]: CPU 4: APIC ID mismatch. Firmware: 0x0001 APIC: 0x0004
[Firmware Bug]: CPU 5: APIC ID mismatch. Firmware: 0x0003 APIC: 0x0005
[Firmware Bug]: CPU 6: APIC ID mismatch. Firmware: 0x0005 APIC: 0x0006
amd_pstate: failed to enable driver mode(3)
ccp 0000:07:00.2: tee: ring init command failed (0x00000005)
ccp 0000:07:00.2: tee: failed to init ring buffer
[ OK ] Finished dracut-initqueue.service - dracut initqueue hook.
[ OK ] Reached target remote-fs-pre.target - Preparation for Remote File Systems.
[ OK ] Reached target remote-cryptsetup.target - Remote Encrypted Volumes.
[ OK ] Reached target remote-fs.target - Remote File Systems.
Starting dracut-pre-mount.service - dracut pre-mount hook...
But installation has been successful.
- Configured to use iGPU. Using motherboard
- HDMI: 1920x1080 120Hz / 2560x1440 120Hz
- DP: 1920x1080 480Hz / 2560x1440 360Hz
- Unlike 4.2.4, fresh 4.3 install supports true monitor sleep (important for automatic pixel cleaning). When 4.2.4 locked screen, monitor was still being waked up rendering black. This has prevented automatic pixel cleaning. With newer kernel or some changes to dom0 screensaver, monitor now exhibit some delay to turn on, which indicates it is being waked up.
Attachments
HCL-ASUS-TUF-Gaming-B550-Pro.yml (901 Bytes)