lovely
November 6, 2022, 12:48am
7
I loaded the hard drive with the qubes os installation onto a computer with gparted and here is the report:
/dev/sdc1 = EFI System partition Fat32 600mib (7.89 mib used) flags = boot; esp
/dev/sdc2 | file system: ext4 | 1 gib
/dev/sdc3 [Encrypted lvm2 pv | mount point = qubes_dom0 | 181.76 gib
unallocated | 1.00 mib
lovely
November 6, 2022, 4:18pm
8
I am willing to pay $50 + tip in btc to whomever can give me 1on1 support to solve this issue.
1 Like
Unfortunately this is beyond my level of expertise. All I can do is to point out to a couple of semi-relevant threads:
Has any consideration been given to a tier of paid support? I noticed that whonix has a paid support option , no clue how much it costs but for the issue I have (not one response in 2 weeks) I’d be willing to pay $50-$75? That is likely not much I realize (about as much as i could afford) but I really really wanted to try to figure it out and I could not elicit one response despite my trying to add more information etc. I completely realize I am owed nothing and this is free software but having …
After a hard shutdown, my Qubes OS 4.1 has broken. It did not allow me to start any VMs with the error something like
with different numbers.
After trying these commands (I shouldn’t have done it!)
I completely broke the boot and it is now stuck at
Job is running for LVM event activation on device 253:0 (10min 10s / no limit)
Finally, as I feared, I reached a point at which qvm-volume-revert cannot save me Please help.
lovely
November 6, 2022, 4:20pm
10
I am willing to pay $50 + tip in BTC to anyone who can provide 1on1 support to solve this ASAP.
My other thread isn’t getting any user support.
I get the errors in shell after the gui boot screen:
“Warning: /dev/qubes_dom0/root does not exist”
“Warning: Not all disks have been found.”
“Warning: You might want to regenerate your initramfs”
/dev/qubes_dom0/swap does not exist
crypto LUKS UUID ****************** (long character string) not found
I loaded the hard drive with the qubes os installation onto a computer with gparted and here is the report:
/dev/sdc1 = EFI System partition Fat32 600mib (7.89 mib used) flags = boot; esp
/dev/sdc2 | file system: ext4 | 1 gib
/dev/sdc3 [Encrypted lvm2 pv | mount point = qubes_dom0 | 181.76 gib
unallocated | 1.00 mib
Even in such case, you should not create new topics for the same problem. Every new post in your original thread puts it to the top of Qubes OS Forum , so if anyone can help, they should already see it. I’m merging this thread to there to help other users find (future) solution more easily.
lovely
November 6, 2022, 6:08pm
12
I need your help @tanky0u and willing to pay in xmr please assist!
lovely
November 6, 2022, 6:14pm
13
@BEBF738VD and @51lieal can you guys help me out with this?
mila
November 6, 2022, 6:35pm
14
Hi,
please let me understand…
If You boot from usb , get a recovery shell and try lsblk /dev/sdc3, what’s the UUID You get?
Cheers,
M.
1 Like
ChrisA
November 6, 2022, 8:40pm
15
I think Mila is on the right track – my question would be:
Does the output from[1]
lsblk /dev/sdc3 | grep luks
match what GRUB has as
rd.luks.uuid=luks-...
?
[1] Adjust sdc3
to match the name of your drive.
1 Like
lovely
November 6, 2022, 8:57pm
16
@mila It says “not a block device” when typing lsblk /dev/sdc3 in shell using recovery
@ChrisA
same thing when i type in: lsblk /dev/sdc3 | grep luks
"not a block device"
I checked gparted in a different linux distro, and these are the /dev’s i found below
/dev/sdc1 = EFI System partition Fat32 600mib (7.89 mib used) flags = boot; esp
/dev/sdc2 | file system: ext4 | 1 gib
/dev/sdc3 [Encrypted lvm2 pv | mount point = qubes_dom0 | 181.76 gib
unallocated | 1.00 mib
ChrisA
November 6, 2022, 9:01pm
17
Did remember to check/adjust the name of the drive?
1 Like
lovely
November 6, 2022, 9:02pm
18
how do i find the name of my drive. I don’t remember my name. the Label name? the label name was New G thats the option that I get when I go into boot manager and it lets me select windows or New G (aka Qubes OS)
ChrisA
November 6, 2022, 9:04pm
19
Oh - the name is /dev/sdc3
… can you try a plain:
lsblk
?
lovely
November 6, 2022, 9:06pm
20
with lsblk here is what i found
name sdb 183gb 0 disk
sdb1 600mb
sdb2 1gb
sdb3 | SIZE 181 gb
sdc 20gb disk /run/install/repo
ChrisA
November 6, 2022, 9:12pm
21
In that case, I think you are looking for
lsblk /dev/sdb3
2 Likes
lovely
November 6, 2022, 9:14pm
22
ok that worked.
It says:
sdb3 MAJ:MIN 8:19 RM: 1 size: 181.8G RO: 0 type: part Mountpoint: ( it is empty here )
I tried the second command: lsblk /dev/sdb3 | grep luks
it doesn’t display anything.
ChrisA
November 6, 2022, 9:31pm
23
I had to check from another machine - try with:
blkid | grep -i luks
and try:
mkdir -p /mnt/foo
mount /dev/sda1 /mnt/foo
grep luks /mnt/foo/EFI/qubes/grub.cfg
– the first should give you the UUID of the encrypted volume - the second should show you the UUID that the machine looks for on boot – are they identical?
2 Likes
lovely
November 6, 2022, 9:33pm
24
Wow thanks for taking the time to help out with another machine.
THE UUID’s are not identical. one is a PARTUUID and the other is the UUID.
Should I proceed with the mkdir steps?
ChrisA
November 6, 2022, 9:35pm
25
PARTUUID and UUID should differ … the grep
tells you what the machine is actually looking for on boot … does that match the UUID?
1 Like
lovely
November 6, 2022, 9:39pm
26
the grep didn’t identify a matching UUID. next to the first UUID it says type=“crypto_LUKS” after typing in command: blkid | grep -i luks
should I reboot and see if I see the UUID on boot?