Bonjour Solene. Voilà ce que ça donne (1/2)
[user@vault ~]$ sudo dmesg
[ 0.000000] Linux version 6.6.25-1.qubes.fc37.x86_64 (mockbuild@0ea67609eec34984a726d02025fcb36b) (gcc (GCC) 12.3.1 20230508 (Red Hat 12.3.1-1), GNU ld version 2.38-27.fc37) #1 SMP PREEMPT_DYNAMIC Fri Apr 5 13:42:55 GMT 2024
[ 0.000000] Command line: root=/dev/mapper/dmroot ro nomodeset console=hvc0 rd_NO_PLYMOUTH rd.plymouth.enable=0 plymouth.enable=0 clocksource=tsc xen_scrub_pages=0 swiotlb=2048
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000018ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000fc000000-0x00000000fc00803f] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000feff8000-0x00000000feffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] APIC: Static calls initialized
[ 0.000000] DMI not present or invalid.
[ 0.000000] Hypervisor detected: Xen HVM
[ 0.000000] Xen version 4.17.
[ 0.000008] HVMOP_pagetable_dying not supported
[ 0.298057] tsc: Fast TSC calibration failed
[ 0.298062] tsc: Detected 2594.104 MHz processor
[ 0.298076] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.298080] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.298085] last_pfn = 0x19000 max_arch_pfn = 0x400000000
[ 0.298141] MTRR map: 0 entries (0 fixed + 0 variable; max 16), built from 8 variable MTRRs
[ 0.298143] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.311105] RAMDISK: [mem 0x03801000-0x04a0afff]
[ 0.311361] ACPI: Early table checksum verification disabled
[ 0.311365] ACPI: RSDP 0x00000000FC008000 000024 (v02 Xen )
[ 0.311371] ACPI: XSDT 0x00000000FC007F60 000034 (v01 Xen HVM 00000000 HVML 00000000)
[ 0.311377] ACPI: FACP 0x00000000FC007D60 00010C (v05 Xen HVM 00000000 HVML 00000000)
[ 0.311383] ACPI: DSDT 0x00000000FC001040 006C9B (v05 Xen HVM 00000000 INTL 20220331)
[ 0.311387] ACPI: FACS 0x00000000FC001000 000040
[ 0.311390] ACPI: FACS 0x00000000FC001000 000040
[ 0.311393] ACPI: APIC 0x00000000FC007E70 00003C (v02 Xen HVM 00000000 HVML 00000000)
[ 0.311396] ACPI: Reserving FACP table memory at [mem 0xfc007d60-0xfc007e6b]
[ 0.311397] ACPI: Reserving DSDT table memory at [mem 0xfc001040-0xfc007cda]
[ 0.311398] ACPI: Reserving FACS table memory at [mem 0xfc001000-0xfc00103f]
[ 0.311399] ACPI: Reserving FACS table memory at [mem 0xfc001000-0xfc00103f]
[ 0.311400] ACPI: Reserving APIC table memory at [mem 0xfc007e70-0xfc007eab]
[ 0.311585] No NUMA configuration found
[ 0.311586] Faking a node at [mem 0x0000000000000000-0x0000000018ffffff]
[ 0.311598] NODE_DATA(0) allocated [mem 0x18fd5000-0x18ffffff]
[ 0.311898] Zone ranges:
[ 0.311900] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.311901] DMA32 [mem 0x0000000001000000-0x0000000018ffffff]
[ 0.311903] Normal empty
[ 0.311904] Device empty
[ 0.311905] Movable zone start for each node
[ 0.311908] Early memory node ranges
[ 0.311908] node 0: [mem 0x0000000000001000-0x000000000009ffff]
[ 0.311910] node 0: [mem 0x0000000000100000-0x0000000018ffffff]
[ 0.311911] Initmem setup node 0 [mem 0x0000000000001000-0x0000000018ffffff]
[ 0.311917] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.311951] On node 0, zone DMA: 96 pages in unavailable ranges
[ 0.313258] On node 0, zone DMA32: 28672 pages in unavailable ranges
[ 0.313406] ACPI: No IOAPIC entries present
[ 0.313407] ACPI: Using ACPI for processor (LAPIC) configuration information
[ 0.313409] TSC deadline timer available
[ 0.313410] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.313421] [mem 0x19000000-0xfbffffff] available for PCI devices
[ 0.313430] Booting kernel on Xen PVH
[ 0.313431] Xen version: 4.17.3
[ 0.313433] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.320247] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.320481] percpu: Embedded 64 pages/cpu s225280 r8192 d28672 u1048576
[ 0.320487] pcpu-alloc: s225280 r8192 d28672 u1048576 alloc=1*2097152
[ 0.320490] pcpu-alloc: [0] 0 1
[ 0.320515] xen: PV spinlocks enabled
[ 0.320518] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 0.320520] Kernel command line: root=/dev/mapper/dmroot ro nomodeset console=hvc0 rd_NO_PLYMOUTH rd.plymouth.enable=0 plymouth.enable=0 clocksource=tsc xen_scrub_pages=0 swiotlb=2048
[ 0.320558] Booted with the nomodeset parameter. Only the system framebuffer will be available
[ 0.320672] Unknown kernel command line parameters “rd_NO_PLYMOUTH”, will be passed to user space.
[ 0.320721] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.320749] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.320807] Fallback order for Node 0: 0
[ 0.320811] Built 1 zonelists, mobility grouping on. Total pages: 96960
[ 0.320812] Policy zone: DMA32
[ 0.321062] mem auto-init: stack:all(zero), heap alloc:on, heap free:on
[ 0.321063] mem auto-init: clearing system memory may take some time…
[ 0.364204] Memory: 328580K/409212K available (18432K kernel code, 3241K rwdata, 8924K rodata, 5140K init, 6164K bss, 80376K reserved, 0K cma-reserved)
[ 0.371453] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.371546] Kernel/User page tables isolation: enabled
[ 0.371603] ftrace: allocating 56241 entries in 220 pages
[ 0.381491] ftrace: allocated 220 pages with 5 groups
[ 0.381586] Dynamic Preempt: full
[ 0.381672] rcu: Preemptible hierarchical RCU implementation.
[ 0.381673] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=2.
[ 0.381674] Trampoline variant of Tasks RCU enabled.
[ 0.381675] Rude variant of Tasks RCU enabled.
[ 0.381675] Tracing variant of Tasks RCU enabled.
[ 0.381676] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.381677] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.385299] NR_IRQS: 524544, nr_irqs: 48, preallocated irqs: 16
[ 0.385356] xen:events: Using FIFO-based ABI
[ 0.385372] xen:events: Xen HVM callback vector for event delivery is enabled
[ 0.385541] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.385653] kfence: initialized - using 2097152 bytes for 255 objects at 0x(ptrval)-0x(ptrval)
[ 0.385717] Console: colour dummy device 80x25
[ 0.385735] printk: console [hvc0] enabled
[ 0.387739] ACPI: Core revision 20230628
[ 0.388238] ACPI: setting ELCR to 0200 (from ffff)
[ 0.388291] APIC: Switch to symmetric I/O mode setup
[ 0.388324] x2apic enabled
[ 0.388394] APIC: Switched APIC routing to: physical x2apic
[ 0.388469] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x25647a45c02, max_idle_ns: 440795287674 ns
[ 0.388503] Calibrating delay loop (skipped), value calculated using timer frequency… 5188.20 BogoMIPS (lpj=2594104)
[ 0.388902] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.388920] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.388954] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.388980] Spectre V2 : Mitigation: Retpolines
[ 0.388994] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.389014] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[ 0.389031] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.389049] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.389073] Spectre V2 : User space: Mitigation: STIBP via prctl
[ 0.389091] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[ 0.389115] MDS: Mitigation: Clear CPU buffers
[ 0.389129] MMIO Stale Data: Unknown: No mitigations
[ 0.389160] x86/fpu: Supporting XSAVE feature 0x001: ‘x87 floating point registers’
[ 0.389181] x86/fpu: Supporting XSAVE feature 0x002: ‘SSE registers’
[ 0.389198] x86/fpu: Supporting XSAVE feature 0x004: ‘AVX registers’
[ 0.389215] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.389233] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using ‘standard’ format.
[ 0.389499] Freeing SMP alternatives memory: 48K
[ 0.389499] pid_max: default: 32768 minimum: 301
[ 0.389499] LSM: initializing lsm=lockdown,capability,yama,integrity
[ 0.389499] Yama: becoming mindful.
[ 0.389499] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[ 0.389499] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[ 0.389499] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[ 0.389499] Xen: using vcpuop timer interface
[ 0.389499] installing Xen timer for CPU 0
[ 0.389499] smpboot: CPU0: Intel(R) Core™ i5-3320M CPU @ 2.60GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[ 0.389499] cpu 0 spinlock event irq 20
[ 0.389499] RCU Tasks: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1.
[ 0.389499] RCU Tasks Rude: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1.
[ 0.389499] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1.
[ 0.389499] Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only.
[ 0.389499] signal: max sigframe size: 1776
[ 0.389499] rcu: Hierarchical SRCU implementation.
[ 0.389499] rcu: Max phase no-delay instances is 400.
[ 0.389499] NMI watchdog: Perf NMI watchdog permanently disabled
[ 0.389499] smp: Bringing up secondary CPUs …
[ 0.389644] installing Xen timer for CPU 1
[ 0.389724] smpboot: x86: Booting SMP configuration:
[ 0.389738] … node #0, CPUs: #1
[ 0.393571] cpu 1 spinlock event irq 25
[ 0.400145] smp: Brought up 1 node, 2 CPUs
[ 0.400160] smpboot: Max logical packages: 1
[ 0.400174] smpboot: Total of 2 processors activated (10376.41 BogoMIPS)
[ 0.402656] devtmpfs: initialized
[ 0.402656] x86/mm: Memory block size: 128MB
[ 0.404120] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.404156] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.404945] pinctrl core: initialized pinctrl subsystem
[ 0.405737] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.405800] xen:grant_table: Grant tables using version 1 layout
[ 0.405841] Grant table initialized
[ 0.406028] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
[ 0.406054] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.406076] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.406317] audit: initializing netlink subsys (disabled)
[ 0.406573] thermal_sys: Registered thermal governor ‘fair_share’
[ 0.406575] thermal_sys: Registered thermal governor ‘bang_bang’
[ 0.406593] thermal_sys: Registered thermal governor ‘step_wise’
[ 0.406609] thermal_sys: Registered thermal governor ‘user_space’
[ 0.406635] audit: type=2000 audit(1713775824.693:1): state=initialized audit_enabled=0 res=1
[ 0.406681] cpuidle: using governor menu
[ 0.407086] PCI: Fatal: No config space access function found
[ 0.407396] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.436667] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.538529] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.540656] cryptd: max_cpu_qlen set to 1000
[ 0.543682] raid6: skipped pq benchmark and selected sse2x4
[ 0.543733] raid6: using ssse3x2 recovery algorithm
[ 0.543947] ACPI: Added _OSI(Module Device)
[ 0.543962] ACPI: Added _OSI(Processor Device)
[ 0.543977] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.543991] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.551399] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.551739] ACPI: OSL: SCI (ACPI GSI 9) not registered
[ 0.552124] ACPI: _OSC evaluation for CPUs failed, trying _PDC
[ 0.554707] ACPI: Interpreter enabled
[ 0.554726] ACPI: PM: (supports S0)
[ 0.554738] ACPI: Using platform specific model for interrupt routing
[ 0.555050] PCI: Using host bridge windows from ACPI; if necessary, use “pci=nocrs” and report a bug
[ 0.555076] PCI: Using E820 reservations for host bridge windows
[ 0.555315] ACPI: Enabled 1 GPEs in block 00 to 0F
[ 0.555345] ACPI Error: No handler or method for GPE 00, disabling event (20230628/evgpe-839)
[ 0.555381] ACPI Error: No handler or method for GPE 01, disabling event (20230628/evgpe-839)
[ 0.555429] ACPI Error: No handler or method for GPE 03, disabling event (20230628/evgpe-839)
[ 0.555464] ACPI Error: No handler or method for GPE 04, disabling event (20230628/evgpe-839)
[ 0.555499] ACPI Error: No handler or method for GPE 05, disabling event (20230628/evgpe-839)
[ 0.555514] ACPI Error: No handler or method for GPE 06, disabling event (20230628/evgpe-839)
[ 0.555549] ACPI Error: No handler or method for GPE 07, disabling event (20230628/evgpe-839)
[ 0.562512] xen:balloon: Initialising balloon driver
[ 0.562561] acpi LNXCPU:02: Still not present
[ 0.562589] acpi LNXCPU:03: Still not present
[ 0.562614] acpi LNXCPU:04: Still not present
[ 0.562638] acpi LNXCPU:05: Still not present
[ 0.562706] acpi LNXCPU:06: Still not present
[ 0.562731] acpi LNXCPU:07: Still not present
[ 0.562756] acpi LNXCPU:08: Still not present
[ 0.562810] iommu: Default domain type: Translated
[ 0.562810] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.562810] SCSI subsystem initialized
[ 0.562810] libata version 3.00 loaded.
[ 0.562810] ACPI: bus type USB registered
[ 0.562810] usbcore: registered new interface driver usbfs
[ 0.562810] usbcore: registered new interface driver hub
[ 0.562810] usbcore: registered new device driver usb
[ 0.563524] pps_core: LinuxPPS API ver. 1 registered
[ 0.563540] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it
[ 0.563569] PTP clock support registered
[ 0.563614] EDAC MC: Ver: 3.0.0
[ 0.563720] NetLabel: Initializing
[ 0.563734] NetLabel: domain hash size = 128
[ 0.563748] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.563781] NetLabel: unlabeled traffic allowed by default
[ 0.563800] mctp: management component transport protocol core
[ 0.563818] NET: Registered PF_MCTP protocol family
[ 0.563836] PCI: Using ACPI for IRQ routing
[ 0.563847] PCI: System does not support PCI
[ 0.563881] vgaarb: loaded
[ 0.563881] clocksource: Switched to clocksource tsc-early
[ 0.564097] VFS: Disk quotas dquot_6.6.0
[ 0.564135] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.564212] pnp: PnP ACPI init
[ 0.564254] pnp: PnP ACPI: found 0 devices
[ 0.569019] NET: Registered PF_INET protocol family
[ 0.569070] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.569527] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 0.569552] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.569677] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.569704] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.569741] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.569837] MPTCP token hash table entries: 512 (order: 1, 12288 bytes, linear)
[ 0.569884] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.569905] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.570036] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.735648] NET: Registered PF_XDP protocol family
[ 0.735674] PCI: CLS 0 bytes, default 64
[ 0.735795] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x25647a45c02, max_idle_ns: 440795287674 ns
[ 0.736152] Trying to unpack rootfs image as initramfs…
[ 0.746556] clocksource: Switched to clocksource tsc
[ 0.762444] Freeing initrd memory: 18472K
[ 0.766587] Initialise system trusted keyrings
[ 0.766624] Key type blacklist registered
[ 0.766729] workingset: timestamp_bits=36 max_order=17 bucket_order=0
[ 0.766763] zbud: loaded
[ 0.769804] integrity: Platform Keyring initialized
[ 0.769839] integrity: Machine keyring initialized
[ 0.782219] NET: Registered PF_ALG protocol family
[ 0.782249] xor: automatically using best checksumming function avx
[ 0.782275] Key type asymmetric registered
[ 0.782287] Asymmetric key parser ‘x509’ registered
[ 0.795530] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[ 0.796004] io scheduler mq-deadline registered
[ 0.796023] io scheduler kyber registered
[ 0.796071] io scheduler bfq registered
[ 0.799009] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[ 0.815404] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.817410] Non-volatile memory driver v1.3
[ 0.817432] Linux agpgart interface v0.103
[ 0.817501] ACPI: bus type drm_connector registered
[ 0.818087] usbcore: registered new interface driver usbserial_generic
[ 0.818115] usbserial: USB Serial support registered for generic
[ 0.818148] i8042: PNP: No PS/2 controller found.
[ 0.818193] mousedev: PS/2 mouse device common for all mice
[ 0.818248] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
[ 0.818295] device-mapper: uevent: version 1.0.3
[ 0.818421] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
[ 0.818721] intel_pstate: CPU model not supported
[ 0.818775] hid: raw HID events driver (C) Jiri Kosina
[ 0.818814] usbcore: registered new interface driver usbhid
[ 0.818829] usbhid: USB HID core driver
[ 0.818924] drop_monitor: Initializing network drop monitor service
[ 0.819044] Initializing XFRM netlink socket
[ 0.819171] NET: Registered PF_INET6 protocol family
[ 0.822090] Segment Routing with IPv6
[ 0.822109] RPL Segment Routing with IPv6
[ 0.822134] In-situ OAM (IOAM) with IPv6
[ 0.822168] mip6: Mobile IPv6
[ 0.822183] NET: Registered PF_PACKET protocol family
[ 0.826145] IPI shorthand broadcast: enabled
[ 0.826175] AVX version of gcm_enc/dec engaged.
[ 0.826304] AES CTR mode by8 optimization enabled
[ 0.829150] sched_clock: Marking stable (826009345, 2956176)->(880033462, -51067941)
[ 0.829360] registered taskstats version 1
[ 0.830647] Loading compiled-in X.509 certificates
[ 0.843834] Loaded X.509 cert ‘Build time autogenerated kernel key: 621c1a90ecfdecbe18b7764d84fef4457333bcdc’
[ 0.846620] page_owner is disabled
[ 0.848403] Key type .fscrypt registered
[ 0.848422] Key type fscrypt-provisioning registered
[ 0.850243] Btrfs loaded, zoned=yes, fsverity=yes
[ 0.850288] Key type big_key registered
[ 0.853492] Key type encrypted registered
[ 0.853546] ima: No TPM chip found, activating TPM-bypass!
[ 0.853566] Loading compiled-in module X.509 certificates
[ 0.855280] Loaded X.509 cert ‘Build time autogenerated kernel key: 621c1a90ecfdecbe18b7764d84fef4457333bcdc’
[ 0.855346] ima: Allocated hash algorithm: sha256
[ 0.855392] ima: No architecture policies found
[ 0.855444] evm: Initialising EVM extended attributes:
[ 0.855472] evm: security.selinux
[ 0.855494] evm: security.SMACK64 (disabled)
[ 0.855522] evm: security.SMACK64EXEC (disabled)
[ 0.855550] evm: security.SMACK64TRANSMUTE (disabled)
[ 0.855578] evm: security.SMACK64MMAP (disabled)
[ 0.855606] evm: security.apparmor
[ 0.855627] evm: security.ima
[ 0.855648] evm: security.capability
[ 0.855670] evm: HMAC attrs: 0x1
[ 0.912603] alg: No test for 842 (842-scomp)
[ 0.912911] alg: No test for 842 (842-generic)
[ 1.071360] xenbus_probe_frontend: Device with no driver: device/vbd/51712
[ 1.071386] xenbus_probe_frontend: Device with no driver: device/vbd/51728
[ 1.071404] xenbus_probe_frontend: Device with no driver: device/vbd/51744
[ 1.071422] xenbus_probe_frontend: Device with no driver: device/vbd/51760
[ 1.071748] hid_bpf: error while preloading HID BPF dispatcher: -22
[ 1.071760] RAS: Correctable Errors collector initialized.
[ 1.071829] clk: Disabling unused clocks
[ 1.073778] Freeing unused decrypted memory: 2028K
[ 1.074749] Freeing unused kernel image (initmem) memory: 5140K
[ 1.075019] Write protecting the kernel read-only data: 28672k
[ 1.075542] Freeing unused kernel image (rodata/data gap) memory: 1316K
[ 1.075683] Run /init as init process
[ 1.075696] with arguments:
[ 1.075698] /init
[ 1.075699] rd_NO_PLYMOUTH
[ 1.075700] with environment:
[ 1.075701] HOME=/
[ 1.075701] TERM=linux
[ 1.081445] Invalid max_queues (4), will use default max: 2.
[ 1.205352] blkfront: xvda: flush diskcache: enabled; persistent grants: enabled; indirect descriptors: enabled; bounce buffer: enabled
[ 1.236089] xvda: xvda1 xvda2 xvda3
[ 1.251814] blkfront: xvdb: flush diskcache: enabled; persistent grants: enabled; indirect descriptors: enabled; bounce buffer: enabled
[ 1.281138] blkfront: xvdc: flush diskcache: enabled; persistent grants: enabled; indirect descriptors: enabled; bounce buffer: enabled
[ 1.285101] blkfront: xvdd: barrier or flush: disabled; persistent grants: enabled; indirect descriptors: enabled; bounce buffer: enabled
[ 2.641004] xvdc: xvdc1 xvdc3
[ 3.103984] random: crng init done
[ 3.171542] EXT4-fs (xvda3): mounted filesystem 2bb5fa8d-6a74-4795-8c9c-85b6bc8d363f r/w with ordered data mode. Quota mode: none.
[ 3.195711] EXT4-fs (xvdd): mounting ext3 file system using the ext4 subsystem
[ 3.201764] EXT4-fs (xvdd): mounted filesystem 6a341523-b907-47fd-bff1-43fccaa726f2 ro with ordered data mode. Quota mode: none.
[ 3.595094] systemd[1]: systemd 253.17-1.fc38 running in system mode (+PAM +AUDIT +SELINUX -APPARMOR +IMA +SMACK +SECCOMP -GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN -IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[ 3.595333] systemd[1]: Detected virtualization xen.
[ 3.595383] systemd[1]: Detected architecture x86-64.
[ 3.610573] systemd[1]: No hostname configured, using default hostname.
[ 3.610963] systemd[1]: Hostname set to .
[ 3.687146] systemd[1]: bpf-lsm: BPF LSM hook not enabled in the kernel, BPF LSM not supported
[ 3.688530] systemd[1]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set
[ 4.144433] systemd[1]: /usr/lib/systemd/system/qubes-gui-agent.service:15: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[ 4.241731] systemd[1]: Queued start job for default target multi-user.target.
[ 4.248090] systemd[1]: Created slice system-getty.slice - Slice /system/getty.
[ 4.249014] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
[ 4.249451] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty.
[ 4.249794] systemd[1]: Created slice user.slice - User and Session Slice.
[ 4.249987] systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch.
[ 4.250141] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
[ 4.250427] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
[ 4.250546] systemd[1]: Expecting device dev-hvc0.device - /dev/hvc0…
[ 4.250630] systemd[1]: Expecting device dev-xvdc1.device - /dev/xvdc1…
[ 4.250718] systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes.
[ 4.250817] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
[ 4.250933] systemd[1]: Reached target remote-fs.target - Remote File Systems.
[ 4.251470] systemd[1]: Reached target slices.target - Slice Units.
[ 4.251580] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
[ 4.253644] systemd[1]: Listening on systemd-coredump.socket - Process Core Dump Socket.
[ 4.253846] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
[ 4.254470] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket.
[ 4.254710] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
[ 4.254956] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
[ 4.255262] systemd[1]: Listening on systemd-oomd.socket - Userspace Out-Of-Memory (OOM) Killer Socket.
[ 4.256484] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
[ 4.256718] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
[ 4.256929] systemd[1]: Listening on systemd-userdbd.socket - User Database Manager Socket.
[ 4.268253] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System…
[ 4.269579] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System…
[ 4.270783] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System…
[ 4.271952] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System…
[ 4.273531] systemd[1]: Starting dev-xvdc1-swap.service - Enable swap on /dev/xvdc1 early…
[ 4.276657] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes…
[ 4.283641] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs…
[ 4.289717] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod…
[ 4.293783] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm…
[ 4.296830] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse…
[ 4.299632] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop…
[ 4.301563] Adding 1048572k swap on /dev/xvdc1. Priority:-2 extents:1 across:1048572k SS
[ 4.328252] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules…
[ 4.330154] systemd[1]: Starting systemd-network-generator.service - Generate network units from Kernel command line…
[ 4.330400] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/StubPcrKernelImage-4a67b082-0a4c-41cf-b6c7-440b29bb8c4f).
[ 4.332327] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices…
[ 4.335431] systemd[1]: Condition check resulted in dev-xvdc1.swap - /dev/xvdc1 being skipped.
[ 4.335541] systemd[1]: Unnecessary job was removed for dev-xvdc1.device - /dev/xvdc1.
[ 4.339342] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System.
[ 4.339823] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
[ 4.340218] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
[ 4.340567] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System.
[ 4.341261] systemd[1]: dev-xvdc1-swap.service: Deactivated successfully.
[ 4.341600] systemd[1]: Finished dev-xvdc1-swap.service - Enable swap on /dev/xvdc1 early.
[ 4.344486] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
[ 4.345352] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[ 4.345646] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs.
[ 4.346349] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
[ 4.346621] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod.
[ 4.351427] systemd[1]: modprobe@drm.service: Deactivated successfully.
[ 4.351883] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm.
[ 4.354396] systemd[1]: Reached target swap.target - Swaps.
[ 4.358706] loop: module loaded
[ 4.360152] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System…
[ 4.366037] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
[ 4.367894] systemd[1]: Mounting tmp.mount - Temporary Directory /tmp…
[ 4.370060] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/).
[ 4.371622] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems…
[ 4.372672] fuse: init (API version 7.39)
[ 4.373469] systemd[1]: modprobe@loop.service: Deactivated successfully.
[ 4.374148] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop.
[ 4.374706] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[ 4.374868] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse.
[ 4.375288] systemd[1]: Finished systemd-network-generator.service - Generate network units from Kernel command line.
[ 4.375547] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System.
[ 4.375731] systemd[1]: Mounted tmp.mount - Temporary Directory /tmp.
[ 4.377693] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System…
[ 4.377925] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met.
[ 4.382294] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System.
[ 4.402304] EXT4-fs (xvda3): re-mounted 2bb5fa8d-6a74-4795-8c9c-85b6bc8d363f r/w. Quota mode: none.
[ 4.403745] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems.
[ 4.404054] systemd[1]: ostree-remount.service - OSTree Remount OS/ Bind Mounts was skipped because of an unmet condition check (ConditionKernelCommandLine=ostree).
[ 4.404128] systemd[1]: systemd-firstboot.service - First Boot Wizard was skipped because of an unmet condition check (ConditionFirstBoot=yes).
[ 4.410442] systemd[1]: systemd-hwdb-update.service - Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc).
[ 4.410573] systemd[1]: systemd-sysusers.service - Create System Users was skipped because no trigger condition checks were met.
[ 4.415146] systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev…
[ 4.419103] xen:xen_evtchn: Event-channel device installed
[ 4.503585] systemd[1]: Finished systemd-udev-trigger.service - Coldplug All udev Devices.
[ 4.677850] Rounding down aligned max_sectors from 4294967295 to 4294967288
[ 4.677979] db_root: cannot open: /etc/target
[ 4.690935] systemd[1]: Finished systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev.
[ 4.691232] systemd[1]: Reached target local-fs-pre.target - Preparation for Local File Systems.
[ 4.697356] systemd[1]: Started haveged.service - Entropy Daemon based on the HAVEGE algorithm.
[ 4.700314] systemd[1]: Starting systemd-journald.service - Journal Service…
[ 4.705231] systemd[1]: Starting systemd-udevd.service - Rule-based Manager for Device Events and Files…
[ 4.725698] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules.
[ 4.732594] systemd[1]: Starting qubes-db.service - Qubes DB agent…
[ 4.734367] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables…
[ 4.775081] systemd-journald[271]: Collecting audit messages is enabled.
[ 4.789079] systemd[1]: Started systemd-journald.service - Journal Service.
[ 4.790984] audit: type=1130 audit(1713775829.076:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=systemd-journald comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 4.891746] systemd-journald[271]: Received client request to flush runtime journal.
[ 4.926346] audit: type=1130 audit(1713775829.211:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=systemd-sysctl comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 4.989670] audit: type=1130 audit(1713775829.276:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=qubes-db comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 5.124995] audit: type=1130 audit(1713775829.411:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=qubes-sysinit comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 5.130468] systemd-journald[271]: /var/log/journal/810e858e12024bb1a49e0b6fa0fba4fc/system.journal: Monotonic clock jumped backwards relative to last journal entry, rotating.
[ 5.130521] systemd-journald[271]: Rotating system journal.
[ 5.155050] audit: type=1130 audit(1713775829.442:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=systemd-random-seed comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 5.322027] audit: type=1130 audit(1713775829.608:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=qubes-rootfs-resize comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 5.424700] EXT4-fs (xvdb): mounted filesystem 0748a6d6-619b-4d94-9636-9b20242a26ce r/w with ordered data mode. Quota mode: none.
[ 5.454604] audit: type=1334 audit(1713775829.741:8): prog-id=24 op=LOAD
[ 5.454766] audit: type=1334 audit(1713775829.741:9): prog-id=25 op=LOAD
[ 5.454832] audit: type=1334 audit(1713775829.741:10): prog-id=26 op=LOAD
[ 5.461669] audit: type=1130 audit(1713775829.748:11): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=systemd-udevd comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 5.519561] audit: type=1130 audit(1713775829.806:12): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=systemd-userdbd comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 5.722033] input: PC Speaker as /devices/platform/pcspkr/input/input0
[ 5.953997] audit: type=1130 audit(1713775830.239:13): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=qubes-mount-dirs comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 6.224841] audit: type=1130 audit(1713775830.511:14): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=qubes-early-vm-config comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 6.316469] audit: type=1130 audit(1713775830.602:15): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=systemd-journal-flush comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 6.360505] audit: type=1130 audit(1713775830.648:16): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=systemd-tmpfiles-setup comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 6.361854] audit: type=1334 audit(1713775830.648:17): prog-id=27 op=LOAD
[ 7.906530] Fallback order for Node 0: 0
[ 7.906535] Built 1 zonelists, mobility grouping on. Total pages: 88104
[ 7.906572] Policy zone: Normal
[ 8.707505] systemd-journald[271]: /var/log/journal/810e858e12024bb1a49e0b6fa0fba4fc/user-1000.journal: Monotonic clock jumped backwards relative to last journal entry, rotating.
[ 10.574728] kauditd_printk_skb: 74 callbacks suppressed
[ 10.574731] audit: type=1106 audit(1713775834.861:77): pid=518 uid=0 auid=1000 ses=2 msg=‘op=PAM:session_close grantors=pam_selinux,pam_loginuid,pam_selinux,pam_keyinit,pam_limits,pam_systemd,pam_unix,pam_umask,pam_lastlog acct=“user” exe=“/usr/lib/qubes/qrexec-agent” hostname=? addr=? terminal=? res=success’
[ 10.574940] audit: type=1104 audit(1713775834.861:78): pid=518 uid=0 auid=1000 ses=2 msg=‘op=PAM:setcred grantors=pam_rootok acct=“user” exe=“/usr/lib/qubes/qrexec-agent” hostname=? addr=? terminal=? res=success’
[ 12.292144] audit: type=1106 audit(1713775836.579:79): pid=515 uid=0 auid=1000 ses=1 msg=‘op=PAM:session_close grantors=pam_selinux,pam_loginuid,pam_selinux,pam_keyinit,pam_limits,pam_systemd,pam_unix,pam_umask,pam_lastlog acct=“user” exe=“/usr/lib/qubes/qrexec-agent” hostname=? addr=? terminal=? res=success’
[ 12.293596] audit: type=1104 audit(1713775836.580:80): pid=515 uid=0 auid=1000 ses=1 msg=‘op=PAM:setcred grantors=pam_rootok acct=“user” exe=“/usr/lib/qubes/qrexec-agent” hostname=? addr=? terminal=? res=success’
[ 13.263465] audit: type=1130 audit(1713775837.623:81): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=qubes-sync-time comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 13.263525] audit: type=1131 audit(1713775837.623:82): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=qubes-sync-time comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 15.656899] audit: type=1130 audit(1713775840.016:83): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=udisks2 comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 16.535320] audit: type=1334 audit(1713775840.895:84): prog-id=39 op=LOAD
[ 16.535747] audit: type=1334 audit(1713775840.895:85): prog-id=40 op=LOAD
[ 16.604226] audit: type=1130 audit(1713775840.964:86): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=upower comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 24.153832] audit: type=1130 audit(1713775848.513:87): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=unbound-anchor comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 24.153930] audit: type=1131 audit(1713775848.513:88): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=unbound-anchor comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 33.778874] audit: type=1100 audit(1713775858.137:89): pid=1099 uid=0 auid=4294967295 ses=4294967295 msg=‘op=PAM:authentication grantors=pam_rootok acct=“root” exe=“/usr/lib/qubes/qrexec-agent” hostname=? addr=? terminal=? res=success’
[ 33.782620] audit: type=1103 audit(1713775858.141:90): pid=1099 uid=0 auid=4294967295 ses=4294967295 msg=‘op=PAM:setcred grantors=pam_rootok acct=“root” exe=“/usr/lib/qubes/qrexec-agent” hostname=? addr=? terminal=? res=success’
[ 33.782701] audit: type=1006 audit(1713775858.141:91): pid=1099 uid=0 old-auid=4294967295 auid=0 tty=(none) old-ses=4294967295 ses=5 res=1
[ 33.782734] audit: type=1300 audit(1713775858.141:91): arch=c000003e syscall=1 success=yes exit=1 a0=3 a1=7ffc7655bee0 a2=1 a3=0 items=0 ppid=1097 pid=1099 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=5 comm=“qrexec-agent” exe=“/usr/lib/qubes/qrexec-agent” key=(null)
[ 33.782813] audit: type=1327 audit(1713775858.141:91): proctitle=“/usr/lib/qubes/qrexec-agent”
[ 33.828972] audit: type=1130 audit(1713775858.186:92): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=user-runtime-dir@0 comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 33.847413] audit: type=1101 audit(1713775858.205:93): pid=1101 uid=0 auid=4294967295 ses=4294967295 msg=‘op=PAM:accounting grantors=pam_unix acct=“root” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 33.847484] audit: type=1103 audit(1713775858.205:94): pid=1101 uid=0 auid=4294967295 ses=4294967295 msg=‘op=PAM:setcred grantors=? acct=“root” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=failed’
[ 33.847539] audit: type=1006 audit(1713775858.205:95): pid=1101 uid=0 old-auid=4294967295 auid=0 tty=(none) old-ses=4294967295 ses=6 res=1
[ 33.847573] audit: type=1300 audit(1713775858.205:95): arch=c000003e syscall=1 success=yes exit=1 a0=8 a1=7ffea421bf40 a2=1 a3=0 items=0 ppid=1 pid=1101 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=6 comm=“(systemd)” exe=“/usr/lib/systemd/systemd” key=(null)
[ 34.873645] vhci_hcd vhci_hcd.0: USB/IP Virtual Host Controller
[ 34.874491] vhci_hcd vhci_hcd.0: new USB bus registered, assigned bus number 1
[ 34.874526] vhci_hcd: created sysfs vhci_hcd.0
[ 34.874582] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
[ 34.874607] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 34.874629] usb usb1: Product: USB/IP Virtual Host Controller
[ 34.874648] usb usb1: Manufacturer: Linux 6.6.25-1.qubes.fc37.x86_64 vhci_hcd
[ 34.874670] usb usb1: SerialNumber: vhci_hcd.0
[ 34.882276] hub 1-0:1.0: USB hub found
[ 34.882306] hub 1-0:1.0: 8 ports detected
[ 34.882469] vhci_hcd vhci_hcd.0: USB/IP Virtual Host Controller
[ 34.882703] vhci_hcd vhci_hcd.0: new USB bus registered, assigned bus number 2
[ 34.882747] usb usb2: We don’t know the algorithms for LPM for this host, disabling LPM.
[ 34.882797] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06
[ 34.882821] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 34.882843] usb usb2: Product: USB/IP Virtual Host Controller
[ 34.882861] usb usb2: Manufacturer: Linux 6.6.25-1.qubes.fc37.x86_64 vhci_hcd
[ 34.882883] usb usb2: SerialNumber: vhci_hcd.0
[ 34.889564] hub 2-0:1.0: USB hub found
[ 34.889593] hub 2-0:1.0: 8 ports detected
[ 37.766248] vhci_hcd vhci_hcd.0: pdev(0) rhport(0) sockfd(0)
[ 37.766276] vhci_hcd vhci_hcd.0: devid(131076) speed(3) speed_str(high-speed)
[ 37.766311] vhci_hcd vhci_hcd.0: Device attached
[ 37.983030] usb 1-1: new high-speed USB device number 2 using vhci_hcd
[ 38.098123] usb 1-1: SetAddress Request (2) to port 0
[ 38.117401] usb 1-1: New USB device found, idVendor=1058, idProduct=070a, bcdDevice=10.30
[ 38.117432] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 38.117454] usb 1-1: Product: My Passport 070A
[ 38.117470] usb 1-1: Manufacturer: Western Digital
[ 38.117488] usb 1-1: SerialNumber: 575832304141394A38363531
[ 38.201992] usb-storage 1-1:1.0: USB Mass Storage device detected
[ 38.203458] usb-storage 1-1:1.0: Quirks match for vid 1058 pid 070a: 200000
[ 38.204027] scsi host0: usb-storage 1-1:1.0
[ 38.204151] usbcore: registered new interface driver usb-storage
[ 38.215077] usbcore: registered new interface driver uas
[ 39.216349] scsi 0:0:0:0: Direct-Access WD My Passport 070A 1030 PQ: 0 ANSI: 4
[ 39.221166] scsi 0:0:0:1: CD-ROM WD Virtual CD 070A 1030 PQ: 0 ANSI: 4
[ 39.285487] scsi 0:0:0:2: Enclosure WD SES Device 1030 PQ: 0 ANSI: 4
[ 39.366780] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 39.386653] sd 0:0:0:0: [sda] 975400960 512-byte logical blocks: (499 GB/465 GiB)
[ 39.402495] sr 0:0:0:1: [sr0] scsi3-mmc drive: 51x/51x caddy
[ 39.402522] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 39.409479] sd 0:0:0:0: [sda] Write Protect is off
[ 39.409503] sd 0:0:0:0: [sda] Mode Sense: 23 00 10 00
[ 39.415726] sd 0:0:0:0: [sda] No Caching mode page found
[ 39.415750] sd 0:0:0:0: [sda] Assuming drive cache: write back
[ 39.483745] sr 0:0:0:1: Attached scsi CD-ROM sr0
[ 39.484478] sr 0:0:0:1: Attached scsi generic sg1 type 5
[ 39.487180] scsi 0:0:0:2: Attached scsi generic sg2 type 13
[ 39.851285] sda: sda1
[ 39.855788] sd 0:0:0:0: [sda] Attached SCSI disk
[ 39.945291] ses 0:0:0:2: Attached Enclosure device
[ 64.298313] kauditd_printk_skb: 96 callbacks suppressed
[ 64.298320] audit: type=1131 audit(1713775888.658:131): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=systemd-hostnamed comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 64.332765] audit: type=1334 audit(1713775888.692:132): prog-id=38 op=UNLOAD
[ 64.332842] audit: type=1334 audit(1713775888.692:133): prog-id=37 op=UNLOAD
[ 64.332876] audit: type=1334 audit(1713775888.692:134): prog-id=36 op=UNLOAD
[ 154.939364] ntfs3: Max link count 4000
[ 154.939385] ntfs3: Enabled Linux POSIX ACLs support
[ 154.939401] ntfs3: Read-only LZX/Xpress compression included
[ 154.946844] ntfs3: sda1: It is recommened to use chkdsk.
[ 155.323124] ntfs3: sda1: volume is dirty and “force” flag is not set!
[ 168.784247] ntfs3: sda1: It is recommened to use chkdsk.
[ 169.164686] ntfs3: sda1: volume is dirty and “force” flag is not set!
[ 178.039380] vhci_hcd: connection closed
[ 178.039648] vhci_hcd: stop threads
[ 178.039678] vhci_hcd: release socket
[ 178.039722] usb 1-1: USB disconnect, device number 2
[ 178.040863] vhci_hcd: disconnect device
[ 178.063980] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 178.064030] sd 0:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 189.001920] audit: type=1104 audit(1713776013.361:135): pid=1102 uid=0 auid=0 ses=6 msg=‘op=PAM:setcred grantors=? acct=“root” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=failed’
[ 189.008540] audit: type=1131 audit(1713776013.367:136): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=user@0 comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 189.028265] audit: type=1131 audit(1713776013.388:137): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=user-runtime-dir@0 comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 191.847674] audit: type=1100 audit(1713776016.207:138): pid=1641 uid=0 auid=4294967295 ses=4294967295 msg=‘op=PAM:authentication grantors=pam_rootok acct=“root” exe=“/usr/lib/qubes/qrexec-agent” hostname=? addr=? terminal=? res=success’
[ 191.848139] audit: type=1103 audit(1713776016.208:139): pid=1641 uid=0 auid=4294967295 ses=4294967295 msg=‘op=PAM:setcred grantors=pam_rootok acct=“root” exe=“/usr/lib/qubes/qrexec-agent” hostname=? addr=? terminal=? res=success’
[ 191.848301] audit: type=1006 audit(1713776016.208:140): pid=1641 uid=0 old-auid=4294967295 auid=0 tty=(none) old-ses=4294967295 ses=7 res=1
[ 191.848358] audit: type=1300 audit(1713776016.208:140): arch=c000003e syscall=1 success=yes exit=1 a0=3 a1=7ffc7655bee0 a2=1 a3=0 items=0 ppid=1639 pid=1641 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=7 comm=“qrexec-agent” exe=“/usr/lib/qubes/qrexec-agent” key=(null)
[ 191.848447] audit: type=1327 audit(1713776016.208:140): proctitle=“/usr/lib/qubes/qrexec-agent”
[ 191.875806] audit: type=1130 audit(1713776016.235:141): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=user-runtime-dir@0 comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 191.889996] audit: type=1101 audit(1713776016.250:142): pid=1643 uid=0 auid=4294967295 ses=4294967295 msg=‘op=PAM:accounting grantors=pam_unix acct=“root” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 193.073746] vhci_hcd vhci_hcd.0: pdev(0) rhport(0) sockfd(0)
[ 193.073775] vhci_hcd vhci_hcd.0: devid(131076) speed(3) speed_str(high-speed)
[ 193.073804] vhci_hcd vhci_hcd.0: Device attached
[ 193.295087] usb 1-1: new high-speed USB device number 3 using vhci_hcd
[ 193.410076] usb 1-1: SetAddress Request (3) to port 0
[ 193.429434] usb 1-1: New USB device found, idVendor=1058, idProduct=070a, bcdDevice=10.30
[ 193.429464] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 193.429486] usb 1-1: Product: My Passport 070A
[ 193.429502] usb 1-1: Manufacturer: Western Digital
[ 193.429517] usb 1-1: SerialNumber: 575832304141394A38363531
[ 193.437025] usb-storage 1-1:1.0: USB Mass Storage device detected
[ 193.437465] usb-storage 1-1:1.0: Quirks match for vid 1058 pid 070a: 200000
[ 193.438195] scsi host0: usb-storage 1-1:1.0
[ 194.490432] scsi 0:0:0:0: Direct-Access WD My Passport 070A 1030 PQ: 0 ANSI: 4
[ 194.508633] scsi 0:0:0:1: CD-ROM WD Virtual CD 070A 1030 PQ: 0 ANSI: 4
[ 194.528956] scsi 0:0:0:2: Enclosure WD SES Device 1030 PQ: 0 ANSI: 4
[ 194.576055] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 194.592702] sr 0:0:0:1: [sr0] scsi3-mmc drive: 51x/51x caddy
[ 194.607754] sr 0:0:0:1: Attached scsi CD-ROM sr0
[ 194.608343] sr 0:0:0:1: Attached scsi generic sg1 type 5
[ 194.608565] ses 0:0:0:2: Attached Enclosure device
[ 194.608738] ses 0:0:0:2: Attached scsi generic sg2 type 13
[ 194.611256] sd 0:0:0:0: [sda] 975400960 512-byte logical blocks: (499 GB/465 GiB)
[ 194.615990] sd 0:0:0:0: [sda] Write Protect is off
[ 194.616014] sd 0:0:0:0: [sda] Mode Sense: 23 00 10 00
[ 194.619093] sd 0:0:0:0: [sda] No Caching mode page found
[ 194.619123] sd 0:0:0:0: [sda] Assuming drive cache: write back
[ 194.650202] sda: sda1
[ 194.650560] sd 0:0:0:0: [sda] Attached SCSI disk
[ 222.305043] kauditd_printk_skb: 103 callbacks suppressed
[ 222.305049] audit: type=1131 audit(1713776046.665:184): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=systemd-hostnamed comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 222.329104] audit: type=1334 audit(1713776046.689:185): prog-id=73 op=UNLOAD
[ 222.329182] audit: type=1334 audit(1713776046.689:186): prog-id=72 op=UNLOAD
[ 222.329242] audit: type=1334 audit(1713776046.689:187): prog-id=71 op=UNLOAD
[ 225.372802] ntfs3: sda1: It is recommened to use chkdsk.
[ 225.462131] ntfs3: sda1: volume is dirty and “force” flag is not set!
[ 231.171409] ntfs3: sda1: It is recommened to use chkdsk.
[ 231.278630] ntfs3: sda1: volume is dirty and “force” flag is not set!
[ 243.804506] vhci_hcd: connection closed
[ 243.804622] vhci_hcd: stop threads
[ 243.804652] vhci_hcd: release socket
[ 243.804702] usb 1-1: USB disconnect, device number 3
[ 243.806979] vhci_hcd: disconnect device
[ 243.827090] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 243.827159] sd 0:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 254.996278] audit: type=1104 audit(1713776079.354:188): pid=1644 uid=0 auid=0 ses=8 msg=‘op=PAM:setcred grantors=? acct=“root” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=failed’
[ 254.997555] audit: type=1131 audit(1713776079.357:189): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=user@0 comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 255.026784] audit: type=1131 audit(1713776079.383:190): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=user-runtime-dir@0 comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 279.448845] audit: type=1100 audit(1713776103.808:191): pid=2038 uid=0 auid=4294967295 ses=4294967295 msg=‘op=PAM:authentication grantors=pam_rootok acct=“root” exe=“/usr/lib/qubes/qrexec-agent” hostname=? addr=? terminal=? res=success’
[ 279.449498] audit: type=1103 audit(1713776103.809:192): pid=2038 uid=0 auid=4294967295 ses=4294967295 msg=‘op=PAM:setcred grantors=pam_rootok acct=“root” exe=“/usr/lib/qubes/qrexec-agent” hostname=? addr=? terminal=? res=success’
[ 279.449709] audit: type=1006 audit(1713776103.809:193): pid=2038 uid=0 old-auid=4294967295 auid=0 tty=(none) old-ses=4294967295 ses=9 res=1
[ 279.449777] audit: type=1300 audit(1713776103.809:193): arch=c000003e syscall=1 success=yes exit=1 a0=3 a1=7ffc7655bee0 a2=1 a3=0 items=0 ppid=2036 pid=2038 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=9 comm=“qrexec-agent” exe=“/usr/lib/qubes/qrexec-agent” key=(null)
[ 279.450050] audit: type=1327 audit(1713776103.809:193): proctitle=“/usr/lib/qubes/qrexec-agent”
[ 279.486378] audit: type=1130 audit(1713776103.846:194): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=user-runtime-dir@0 comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 279.500900] audit: type=1101 audit(1713776103.860:195): pid=2040 uid=0 auid=4294967295 ses=4294967295 msg=‘op=PAM:accounting grantors=pam_unix acct=“root” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 279.500982] audit: type=1103 audit(1713776103.860:196): pid=2040 uid=0 auid=4294967295 ses=4294967295 msg=‘op=PAM:setcred grantors=? acct=“root” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=failed’
[ 279.501032] audit: type=1006 audit(1713776103.861:197): pid=2040 uid=0 old-auid=4294967295 auid=0 tty=(none) old-ses=4294967295 ses=10 res=1
[ 279.501069] audit: type=1300 audit(1713776103.861:197): arch=c000003e syscall=1 success=yes exit=1 a0=8 a1=7ffea421bf40 a2=1 a3=0 items=0 ppid=1 pid=2040 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=10 comm=“(systemd)” exe=“/usr/lib/systemd/systemd” key=(null)
[ 280.815097] vhci_hcd vhci_hcd.0: pdev(0) rhport(0) sockfd(0)
[ 280.815127] vhci_hcd vhci_hcd.0: devid(131078) speed(3) speed_str(high-speed)
[ 280.815165] vhci_hcd vhci_hcd.0: Device attached
[ 281.032006] usb 1-1: new high-speed USB device number 4 using vhci_hcd
[ 281.146004] usb 1-1: SetAddress Request (4) to port 0
[ 281.163436] usb 1-1: New USB device found, idVendor=1058, idProduct=070a, bcdDevice=10.30
[ 281.163467] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 281.163490] usb 1-1: Product: My Passport 070A
[ 281.163506] usb 1-1: Manufacturer: Western Digital
[ 281.163530] usb 1-1: SerialNumber: 575832304141394A38363531
[ 281.169990] usb-storage 1-1:1.0: USB Mass Storage device detected
[ 281.170275] usb-storage 1-1:1.0: Quirks match for vid 1058 pid 070a: 200000
[ 281.175795] scsi host0: usb-storage 1-1:1.0
[ 282.219269] scsi 0:0:0:0: Direct-Access WD My Passport 070A 1030 PQ: 0 ANSI: 4
[ 282.224201] scsi 0:0:0:1: CD-ROM WD Virtual CD 070A 1030 PQ: 0 ANSI: 4
[ 282.272732] scsi 0:0:0:2: Enclosure WD SES Device 1030 PQ: 0 ANSI: 4
[ 282.300728] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 282.323231] sd 0:0:0:0: [sda] 975400960 512-byte logical blocks: (499 GB/465 GiB)
[ 282.327112] sd 0:0:0:0: [sda] Write Protect is off
[ 282.327137] sd 0:0:0:0: [sda] Mode Sense: 23 00 10 00
[ 282.330388] sd 0:0:0:0: [sda] No Caching mode page found
[ 282.330410] sd 0:0:0:0: [sda] Assuming drive cache: write back
[ 282.337716] sr 0:0:0:1: [sr0] scsi3-mmc drive: 51x/51x caddy
[ 282.355354] sr 0:0:0:1: Attached scsi CD-ROM sr0
[ 282.356542] sr 0:0:0:1: Attached scsi generic sg1 type 5
[ 282.357664] ses 0:0:0:2: Attached Enclosure device
[ 282.359314] ses 0:0:0:2: Attached scsi generic sg2 type 13
[ 282.397307] sda: sda1
[ 282.399442] sd 0:0:0:0: [sda] Attached SCSI disk
[ 288.567102] ntfs3: sda1: It is recommened to use chkdsk.
[ 288.648157] ntfs3: sda1: volume is dirty and “force” flag is not set!
[ 309.876718] kauditd_printk_skb: 100 callbacks suppressed
[ 309.876724] audit: type=1131 audit(1713776134.236:237): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=systemd-hostnamed comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 309.900525] audit: type=1334 audit(1713776134.260:238): prog-id=91 op=UNLOAD
[ 309.900557] audit: type=1334 audit(1713776134.260:239): prog-id=90 op=UNLOAD
[ 309.900580] audit: type=1334 audit(1713776134.260:240): prog-id=89 op=UNLOAD
[ 316.418057] ntfs3: sda1: It is recommened to use chkdsk.
[ 316.823488] ntfs3: sda1: volume is dirty and “force” flag is not set!
[ 318.904013] audit: type=1130 audit(1713776143.262:241): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=qubes-update-check comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 318.904400] audit: type=1131 audit(1713776143.262:242): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=qubes-update-check comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 325.199174] vhci_hcd: connection closed
[ 325.199245] vhci_hcd: stop threads
[ 325.199280] vhci_hcd: release socket
[ 325.199333] usb 1-1: USB disconnect, device number 4
[ 325.199998] vhci_hcd: disconnect device
[ 325.230498] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 325.230553] sd 0:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 334.863929] audit: type=1100 audit(1713776159.223:243): pid=2451 uid=0 auid=4294967295 ses=4294967295 msg=‘op=PAM:authentication grantors=pam_rootok acct=“root” exe=“/usr/lib/qubes/qrexec-agent” hostname=? addr=? terminal=? res=success’
[ 334.864423] audit: type=1103 audit(1713776159.224:244): pid=2451 uid=0 auid=4294967295 ses=4294967295 msg=‘op=PAM:setcred grantors=pam_rootok acct=“root” exe=“/usr/lib/qubes/qrexec-agent” hostname=? addr=? terminal=? res=success’
[ 334.864481] audit: type=1006 audit(1713776159.224:245): pid=2451 uid=0 old-auid=4294967295 auid=0 tty=(none) old-ses=4294967295 ses=11 res=1
[ 334.864518] audit: type=1300 audit(1713776159.224:245): arch=c000003e syscall=1 success=yes exit=1 a0=3 a1=7ffc7655bee0 a2=1 a3=0 items=0 ppid=2449 pid=2451 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=11 comm=“qrexec-agent” exe=“/usr/lib/qubes/qrexec-agent” key=(null)
[ 334.864588] audit: type=1327 audit(1713776159.224:245): proctitle=“/usr/lib/qubes/qrexec-agent”
[ 334.883170] audit: type=1105 audit(1713776159.243:246): pid=2451 uid=0 auid=0 ses=11 msg=‘op=PAM:session_open grantors=pam_selinux,pam_loginuid,pam_selinux,pam_keyinit,pam_limits,pam_systemd,pam_unix,pam_umask,pam_lastlog acct=“root” exe=“/usr/lib/qubes/qrexec-agent” hostname=? addr=? terminal=? res=success’
[ 334.904934] audit: type=1334 audit(1713776159.264:247): prog-id=92 op=LOAD
[ 334.905102] audit: type=1334 audit(1713776159.265:248): prog-id=93 op=LOAD
[ 334.905127] audit: type=1334 audit(1713776159.265:249): prog-id=94 op=LOAD
[ 334.968993] audit: type=1130 audit(1713776159.328:250): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=systemd-hostnamed comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 335.318835] vhci_hcd vhci_hcd.0: pdev(0) rhport(0) sockfd(0)
[ 335.318863] vhci_hcd vhci_hcd.0: devid(131078) speed(3) speed_str(high-speed)
[ 335.318997] vhci_hcd vhci_hcd.0: Device attached
[ 335.534969] usb 1-1: new high-speed USB device number 5 using vhci_hcd
[ 335.649114] usb 1-1: SetAddress Request (5) to port 0
[ 335.683393] usb 1-1: New USB device found, idVendor=1058, idProduct=070a, bcdDevice=10.30
[ 335.683425] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 335.683447] usb 1-1: Product: My Passport 070A
[ 335.683462] usb 1-1: Manufacturer: Western Digital
[ 335.683478] usb 1-1: SerialNumber: 575832304141394A38363531
[ 335.694769] usb-storage 1-1:1.0: USB Mass Storage device detected
[ 335.705722] usb-storage 1-1:1.0: Quirks match for vid 1058 pid 070a: 200000
[ 335.706371] scsi host0: usb-storage 1-1:1.0
[ 336.754662] scsi 0:0:0:0: Direct-Access WD My Passport 070A 1030 PQ: 0 ANSI: 4
[ 336.766032] scsi 0:0:0:1: CD-ROM WD Virtual CD 070A 1030 PQ: 0 ANSI: 4
[ 336.792041] scsi 0:0:0:2: Enclosure WD SES Device 1030 PQ: 0 ANSI: 4
[ 336.830025] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 336.844164] sd 0:0:0:0: [sda] 975400960 512-byte logical blocks: (499 GB/465 GiB)
[ 336.847470] sd 0:0:0:0: [sda] Write Protect is off
[ 336.847493] sd 0:0:0:0: [sda] Mode Sense: 23 00 10 00
[ 336.850245] sd 0:0:0:0: [sda] No Caching mode page found
[ 336.850265] sd 0:0:0:0: [sda] Assuming drive cache: write back
[ 336.855979] sr 0:0:0:1: [sr0] scsi3-mmc drive: 51x/51x caddy
[ 336.894571] sda: sda1
[ 336.894797] sd 0:0:0:0: [sda] Attached SCSI disk
[ 336.898055] sr 0:0:0:1: Attached scsi CD-ROM sr0
[ 336.898908] sr 0:0:0:1: Attached scsi generic sg1 type 5
[ 336.899064] ses 0:0:0:2: Attached Enclosure device
[ 336.899127] ses 0:0:0:2: Attached scsi generic sg2 type 13
[ 351.093396] ntfs3: sda1: It is recommened to use chkdsk.
[ 351.467237] ntfs3: sda1: volume is dirty and “force” flag is not set!
[ 357.379366] ntfs3: sda1: It is recommened to use chkdsk.
[ 357.480966] ntfs3: sda1: volume is dirty and “force” flag is not set!
[ 365.000701] kauditd_printk_skb: 2 callbacks suppressed
[ 365.000708] audit: type=1131 audit(1713776189.357:253): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=systemd-hostnamed comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 365.033332] audit: type=1334 audit(1713776189.393:254): prog-id=94 op=UNLOAD
[ 365.033366] audit: type=1334 audit(1713776189.393:255): prog-id=93 op=UNLOAD
[ 365.033391] audit: type=1334 audit(1713776189.393:256): prog-id=92 op=UNLOAD
[ 366.765587] ntfs3: sda1: It is recommened to use chkdsk.
[ 367.162790] ntfs3: sda1: volume is dirty and “force” flag is not set!
[ 464.324699] ntfs3: sda1: It is recommened to use chkdsk.
[ 464.680265] ntfs3: sda1: volume is dirty and “force” flag is not set!
[ 467.914501] ntfs3: sda1: It is recommened to use chkdsk.
[ 467.992063] ntfs3: sda1: volume is dirty and “force” flag is not set!
[ 474.598997] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 474.662833] usb 1-1: USB disconnect, device number 5
[ 475.404088] vhci_hcd: connection closed
[ 475.404270] vhci_hcd: stop threads
[ 475.404300] vhci_hcd: release socket
[ 475.404315] vhci_hcd: disconnect device
[ 485.990505] audit: type=1104 audit(1713776310.349:257): pid=2041 uid=0 auid=0 ses=10 msg=‘op=PAM:setcred grantors=? acct=“root” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=failed’
[ 485.992970] audit: type=1131 audit(1713776310.353:258): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=user@0 comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 486.011521] audit: type=1131 audit(1713776310.370:259): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=user-runtime-dir@0 comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 958.062191] audit: type=1130 audit(1713776782.419:260): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=systemd-tmpfiles-clean comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
[ 958.062245] audit: type=1131 audit(1713776782.419:261): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=systemd-tmpfiles-clean comm=“systemd” exe=“/usr/lib/systemd/systemd” hostname=? addr=? terminal=? res=success’
