Asus z590p prime wifi

User Support HCL Reports
1 
---
layout:
  'hcl'
type:
  'desktop'
hvm:
  'yes'
iommu:
  'yes'
slat:
  'yes'
tpm:
  'unknown'
remap:
  'yes'
brand: |
  ASUS
model: |
  System Product Name
bios: |
  1601
cpu: |
  11th Gen Intel(R) Core(TM) i7-11700K @ 3.60GHz
cpu-short: |
  FIXME
chipset: |
  Intel Corporation Device [8086:4c43] (rev 01)
chipset-short: |
  FIXME
gpu: |
  Intel Corporation RocketLake-S GT1 [UHD Graphics 750] [8086:4c8a] (rev 04) (prog-if 00 [VGA controller])
gpu-short: |
  FIXME
network: |
  Intel Corporation Tiger Lake PCH CNVi WiFi (rev 11)
  Realtek Semiconductor Co., Ltd. RTL8125 2.5GbE Controller (rev 04)
memory: |
  31540
scsi: |
  Samsung SSD 840  Rev: 6B0Q
  Samsung SSD 850  Rev: 4B6Q
  BW-16D1HT        Rev: 1.01
  USB SD Reader    Rev: 1.00
  USB CF Reader    Rev: 1.01
  USB xD/SM Reader Rev: 1.02
  USB MS Reader    Rev: 1.03
usb: |
  1
versions:

- works:
    'FIXME:yes|no|partial'
  qubes: |
    R4.1
  xen: |
    4.14.5
  kernel: |
    5.15.52-1
  remark: |
    FIXME
  credit: |
    FIXAUTHOR
  link: |
    FIXLINK

---

Remarks

Need to turn on IOMMU in UFEI. No other problems.

Video works after suspend, unlike my older board+cpu. That was huge to save wear on the hardware.

Wifi/Ethernet works without issues.

Some devices show as ie, ‘00:1f.5 Unknown: Intel Corporation Tiger Lake-H SPI Controller’, but they all seem to work.

Although, this step and subsequent procedure to copy qubes to BOOT might have been needed. It was an auto reflex step for me to do, so I never bothered to check.
cp -r /mnt/systemimage/boot/efi/EFI/qubes /mnt/systemimage/boot/efi/EFI/BOOT

Edit: I guess you don’t need to perform the above steps ever since Qubes started using grub. So it seems all that was needed was to turn on IOMUU in the UEFI menu (mobo is UEFI only, does not support BIOS) and the install and everything works correctly.

Attachments

2 Likes
2

Thank you @joe.blough for this HCL report. No other issues with this very recent CPU? Cool!

Sorry for the delay. Your report is listed on the website now.

1 Like
3

Video works after suspend, unlike my older board+cpu. That was huge to save wear on the hardware.

Wifi/Ethernet works without issues.

Some devices show as ie, ‘00:1f.5 Unknown: Intel Corporation Tiger Lake-H SPI Controller’, but they all seem to work.

Although, this step and subsequent procedure to copy qubes to BOOT might have been needed. It was an auto reflex step for me to do, so I never bothered to check.
cp -r /mnt/systemimage/boot/efi/EFI/qubes /mnt/systemimage/boot/efi/EFI/BOOT

Edit: I guess you don’t need to perform the above steps ever since Qubes started using grub. So it seems all that was needed was to turn on IOMUU in the UEFI menu (mobo is UEFI only, does not support BIOS) and the install and everything works correctly.

2 Likes