TUXEDO Pulse 15 - Gen1


Wifi works out of the box, Battery looked ok, but hard to tell when you run lots of VMs with data updating constantly.

Adapter: PCI adapter
vddgfx: 1.34 V
vddnb: 899.00 mV
edge: +45.0°C
power1: 4.00 mW

Adapter: ACPI interface
in0: 13.04 V
curr1: 0.00 A

Adapter: PCI adapter
Tctl: +50.8°C

Adapter: PCI adapter
Composite: +30.9°C (low = -273.1°C, high = +81.8°C)
(crit = +84.8°C)
Sensor 1: +30.9°C (low = -273.1°C, high = +65261.8°C)
Sensor 2: +34.9°C (low = -273.1°C, high = +65261.8°C)

Adapter: ACPI interface
temp1: +50.0°C (crit = +100.0°C)


Qubes-HCL-TUXEDO-TUXEDO_Pulse_15_Gen1-20220303-211206.yml (867 Bytes)


Thank you @mono for your HCL report, which is online now.

1 Like

Just installed 4.1 on a TUXEDO Pulse 15 - Gen1
AMD Ryzen 7 4800H
Intel Wi-Fi 6 AX200

Testing on wifi right now as there is no ethernet port anywhere nearby, i am traveling.

Amazingly fast, will come back if i find something that doesn’t work.

1 Like

Hi Mono, I’ve two Tuxedo Pulse 15 Gen1 laptops and I wonder whether on your Tuxedo the power led slowly flashes as though the system would be in sleep mode, although it’s normally running. I had that issue on Arch Linux too; there I could fix it by installing the Tuxedo keyboard driver. The driver is open source but it would require to install a dev environment and compile / install the driver in dom0, hence I’m reluctant to do that.

It has nothing to do with the firmware version. I tried with A02, A03, and A05 and the respective ECs.

Thanks in advance.