---
layout:
'hcl'
type:
'Notebook'
hvm:
'yes'
iommu:
'yes'
slat:
'yes'
tpm:
'2.0'
remap:
'yes'
brand: |
LENOVO
model: |
20XK006BUS
bios: |
R1MET60W (1.30 )
cpu: |
AMD Ryzen 7 PRO 5850U with Radeon Graphics
cpu-short: |
FIXME
chipset: |
Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne Root Complex [1022:1630]
chipset-short: |
FIXME
gpu: |
Advanced Micro Devices, Inc. [AMD/ATI] Cezanne [Radeon Vega Series / Radeon Vega Mobile Series] [1002:1638] (rev d1) (prog-if 00 [VGA controller])
gpu-short: |
FIXME
network: |
Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 0e)
Intel Corporation Wi-Fi 6 AX210/AX211/AX411 160MHz [8086:2725] (rev 1a)
Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
memory: |
31566
scsi: |
usb: |
4
certified:
'no'
versions:
- works:
'FIXME:yes|no|partial'
qubes: |
R4.2.4
xen: |
4.17.5
kernel: |
6.14.4-1
remark: |
FIXME
credit: |
FIXAUTHOR
link: |
FIXLINK
Remarks
Works great more or less out of box, save for the wireless.
Swapping the Wi-Fi chip was quite easy, just a few screws on the bottom of the laptop, and then pry it open. See report for replacement wireless chip hardware.
Only annoyance is that the trackpad has a bit of difficulty with the built-in left/right click, but I have not tested this on another OS, so I am unsure if this is a hardware or driver issue. However, the trackpad also has left/middle/right click buttons above it (below the keyboard), so I just use these, instead.
Touch screen and media keys work great out of box.
Seemingly, doesn’t work with sys-gui-gpu, just boots to a blank screen, or a blinking cursor, depending on configuration.
I may have done something wrong, but after 3+ days I gave up on it.
Runs sys-gui and sys-gui-vnc just fine, however.
Update:
The trackpad’s mouse is totally fine, actually
When I took apart the laptop, I accidentally let something, (a piece of electrical tape?) get in the way of one of the shell’s clips near the trackpad. I unscrewed the bottom, popped everything correctly into place, and now the trackpad works great!